How the SafeCard works
The SafeCard is made of aluminum and titanium alloy and is used for holding cards. All cards are immediately to hand and your most important plastic cards are protected against any bending, distortion or breakage.
Also, the SafeCard is protected against unwanted RFID (Radio Frequency Identification) readers and this prevents the information from your cards from being copied.
The SafeCard is capable of blocking readers from scanning your identity, credit cards, debit cards, banking information, driver licenses and other RFID cards.
How to use the SafeCard
The case capable for holding from 4 up to 6 cards. The card protector can hold six cards if one has debossed (thickened) letters, five cards if three cards have debossed letters or four cards if all cards have debossed letters. Put the most used cards at the back of the SafeCard for optimal use. Gradually slide the cards out with the black handle in one movement in the direction of the arrow. The cards will then be immediately available cards if all cards have debossed letters. Put the most used cards at the back of the SafeCard for optimal use.
Gradually slide the cards out with the black handle in one movement in the direction of the arrow. The cards will then be immediately available for use and you choose the one which is necessary.
Slide the cards back into the holder after use. Clean with a soft damp cloth and allow to dry before use.
A Please note!
If the button does not spring slowly back after use, please follow these steps below:
* Change the order of the cards, remove dirt by shaking, blowing or cleaning with warm water.
* Provides limited protection against strong magnets and is not suitable for cardboard business cards.
* The model is designed for plastic cards with standard credit card size. Cards that are smaller can be loose and fall out. Cards that are wider can damage the mechanism or may cause other cards to loosen or fall out.
